PSoC™ 6 Forum Discussions
在eclipse中导入多核工程后点击编译,提示Libraries: "core-make recipe-make" not found. Run "make getlibs" to ensure all required build and code dependencies are present.. Stop.
make: *** [C:/Users/86181/ModusToolbox/tools_3.1/make/application.mk:72: build] Error 2,请问这是什么原因造成的,可以通过什么方法解决?
Hello,
I have configured an SRAM chip to work with SMIF in normal mode. Now I want to enable XIP/memory mapping of that memory.
It seems like the memory map of CY8C62x7 expects external RAM to live at 0x60000000 – 0x9FFFFFFF (according to the datasheet). However, I'm having difficulty configuring SMIF to point to that address when memory mapping.
Do you have any hints for me on how to get this to work?
Hi all,
XENSIVTM MEMS microphones PDM接口搭配MCU推荐哪个型号?
是否可以直接处理识别PDM讯号?
Dear Receiver,
We know there are many kinds of power supply source in PSoC 6.
For example: there are VDDD, VDDIO1, VDDIO2, VDDA, etc.
As I know, the power supply source of "Flash" is from VDDD.
Next,
CY8C6247BZI-D54 has 1MB flash
CY8C624ABZI-D44 has 2MB flash
I would like to know is there any "current consumption difference" between 2M flash and 1M flash?
Thank you so much.
Show LessI am a first year student so please bear with me, I am new to this. I am dealing with the Cypress MiniProg4 to program an external intelligent board(the RIS). I was wondering why we aren' t connecting through the JTAG but rather using a DBG Connector to program/ debug the board.
Show LessHi
In the Secure_Boot documentation sample for the PSoC 64 Secure MCU, CySecureTools uses keys in the form of pre-prepared files during the Provisioning process.
However, in actual operational scenarios, having keys in file format exposed is clearly not in line with security standards.
So, as indicated in the title, how should CySecureTools directly access the key inside an external storage device?"
Thanks
Lucas
I am using 3 PSoC™ 62S2 Wi-Fi BT Pioneer Kit for testing matter door lock sample application. I have got the source from https://github.com/Infineon/mtb-example-psoc6-matter-door-lock . I initially have tried connecting with access point and the configuration details are stored in persistent storage. Requesting help to clear configuration details (Wi-Fi SSID and password) from the persistent storage or putting to factory mode.
Show LessThanks to this community, I could manage to make the CPUs to enter deep sleep during advertising and connection intervals. After this, I checked consumed current during the process and I want to ask some question about current consumption.
Questions
Entering deep sleep fails for a dozen seconds immediately after disconnecting or receiving read/write requests.
I checked consumed current during the process and I found that the CPUs cannot enter deep sleep for a dozen seconds immediately after disconnecting or receiving read/write requests (Please refer to attached images). It seems that "Cy_SysPm_CpuEnterDeepSleep(CY_SYSPM_WAIT_FOR_INTERRUPT)" returns "CY_SYSPM_FAIL". Do you know the reason why it returns so, and how to enter deep sleep immediately after disconnecting or receiving read/write requests?
Can I change connection intervals?
Can I change connection intervals? I found the config which changes advertising interval, but I cannot find it that of connection intervals. Is there a function to change connection intervals?
That is the all which I want to ask you. Thanks for your kindness.
Show Less
We're experimenting with using the auxiliary memory of the MCU to log ADC voltage readings for later retrieval. Having called SystemInit() earlier in main(), I wrote a for loop to scroll through array values (previously recorded in voltagemVolts[mVLength]) and send them to the desired memory block.
for (short i = 0; i < mVLength; i++) {
uint32_t mV = voltagemVolts[i];
uint32_t *mVar = &mV;
Cy_Flash_WriteRow(0x14000000 + i, mVar);
}
When testing the code, we get a double lockup error and automatic termination when the program gets to Cy_Flash_WriteRow().
Show Less