Hello,
I placed the UART and timer on PSoC 63 as follows.
Looking at the interrupt tab, IRQ46 and IRQ90 respectively.
This "Sysint_Timer" seems to be different from TCPWM.
What is "Sysint_Timer" and what does "CTI" stand for?
Best regards,
Yocchi
Solved! Go to Solution.
Hi YoIs_1298666ā-san,
The IRQn for Timer0 Counter0 is 90 only. Looks like a mistake in the architecture TRM. We will file a defect ticket on the same.
CTI refers to Cross-Trigger Interface. Refer Embedded Cross Triggering section in architecture TRM for details.
Regards,
Bragadeesh
Hello,
According to ācy8c6347bzi_bld53.hā, IRQ90 is tcpwm_0_interrupts_0_IRQn.
Best regards,
Yocchi
Hi YoIs_1298666ā-san,
The IRQn for Timer0 Counter0 is 90 only. Looks like a mistake in the architecture TRM. We will file a defect ticket on the same.
CTI refers to Cross-Trigger Interface. Refer Embedded Cross Triggering section in architecture TRM for details.
Regards,
Bragadeesh