cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 6 MCU

New Contributor

Good afternoon,

We are looking at developing a proprietary solution aiming at processing analog signals mentioned in the object and issued e.g. by an F/T Transducer Without Electronics from ATI-IA.

What would be the most suitable controller for that purpose in terms of analog front-end (fig. 2.1 p.9):

  • excitation voltage and amplifier with adjustable gain for the 6 gages (DAC)
  • converting analog data into numerical values   for the 6 gages (ADC)
  • processing calibration matrices: matrix products and transpose (MCU)

Thanks and Regards,

EMe.

0 Likes
Reply
1 Solution
Moderator
Moderator

Hi,

PSoC4 and PSoC5 and PSoC6 devices can be suitable candidates. PSoC 4 has opamps, IDACs(7,8bit),SAR ADC(12 bit) and Cortex M0 core meeting your requirement. PSoC5 has opmaps,VDACs(7,8 bit), SAR ADC(12bit),DelSig ADC(20bit) and Cortex M3 core meeting your requirement. PSoC 6 has opamps,12 bit VDAC, SAR ADC (12 bit) and Cortex M0 and Cortex M4 core cores which meets the requirements.

Best Regards,

Vasanth

View solution in original post

0 Likes
Reply
1 Reply
Moderator
Moderator

Hi,

PSoC4 and PSoC5 and PSoC6 devices can be suitable candidates. PSoC 4 has opamps, IDACs(7,8bit),SAR ADC(12 bit) and Cortex M0 core meeting your requirement. PSoC5 has opmaps,VDACs(7,8 bit), SAR ADC(12bit),DelSig ADC(20bit) and Cortex M3 core meeting your requirement. PSoC 6 has opamps,12 bit VDAC, SAR ADC (12 bit) and Cortex M0 and Cortex M4 core cores which meets the requirements.

Best Regards,

Vasanth

View solution in original post

0 Likes
Reply
Top labels