cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 6 MCU

GuoXiangH_21
Employee

Dears:

           we try to use CY8CPROTO-062-4343W drive CY8CKIT-028-TFT ,use ModusToolBox 1.1 ,use TFTemWin example ,modify pinout as following:

           and we download the code into board ,but TFT display no response

          any other pin need to connected ?

     we 1562832333(1).png微信图片_20190711161204.jpg微信图片_20190711161143.jpg

1 Solution
SanjeevG_16
Employee

Hi,

Can you tell me if you have matched the configuration of your PinOut with that of the original code example PinOuts, that is, the drive mode and the Initial drive state of the pins

View solution in original post

5 Replies
SanjeevG_16
Employee

Hi,

Can you tell me if you have matched the configuration of your PinOut with that of the original code example PinOuts, that is, the drive mode and the Initial drive state of the pins

View solution in original post

SaKrst
New Contributor II

Hello,

Could you please tell where to find the example GrantH_21​?

0 Likes
SanjeevG_16
Employee

SaKr_2051156​, it is an example project available in Modus Toolbox

0 Likes
GuoXiangH_21
Employee

in ModusToolBox 1.1 new Application--> select CY8CPROTO-062-4343W -->  TFTemWin

GuoXiangH_21
Employee

I configure the 8080 I/F pin as strong output mode ,it works ^_^

TKS

0 Likes
Top labels