cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 6 MCU

YeJE_3763896
New Contributor II

HELLO, I am making a BLE MODULE using CY8C6336BZI-BLF03.

I asked yesterday, I have another question today

(plz check the attached file first.)

I don't use the "VTARG". So, Do not need to the attached schematic? Do I have need to use that?

If using that, can I change "VDD_NS" to "VDDR" ?

Thank you for your time and prompt response

0 Likes
1 Solution
VenkataD_41
Moderator
Moderator

Hi,

There is no need to connect the VTARG as shown in the image attached.

Please note that VDD_NS should be connected to VDDD and also a 10 uF decoupling capacitor should be connected on VDD_NS.

If you are using BLE please check the connections for VDDR1, VDDR2 and VDDR3 in page number 20 of the PSoC 63 device datasheet.

http://www.cypress.com/file/385921/download

Thanks

Ganesh

View solution in original post

0 Likes
1 Reply
VenkataD_41
Moderator
Moderator

Hi,

There is no need to connect the VTARG as shown in the image attached.

Please note that VDD_NS should be connected to VDDD and also a 10 uF decoupling capacitor should be connected on VDD_NS.

If you are using BLE please check the connections for VDDR1, VDDR2 and VDDR3 in page number 20 of the PSoC 63 device datasheet.

http://www.cypress.com/file/385921/download

Thanks

Ganesh

View solution in original post

0 Likes
Top labels