A new Knowledge Base article has been filed to address an issue customers have seen with our Kit collateral on the CY8CKIT-002B rev *B using the CY8C28xxx device. The title of this post is the symptom of the issue. The knowledge based article and workaround is located here:
If you have experienced this issue and the workaround does not work please file a tech support case and reference this forum post and Knowledge Base article. To file a tech support case please navigate to the following web page:
Product Marketing Engineer
Thank you for your reply.
But that is not what I am looking for.
I am looking for CY8CKIT-001 PSoC1 ISO (Create CD), not CY8CKIT-001 PSoC 3 / PSoC 5 ISO (Create CD).
On that page is a setup file, "CY8CKIT-001 PSoC 3 Setup (Kit Design Files.....",
you could download that, and convert it to ISO using Winrar and Winzip.
Its not clear this is the original disk shipped with the kit.
If you want I could create an ISO of my disk, and we could figure out a way of
FTPing it to you ......
That page does not have anything that shows an ISO disk.
It has one disk install labeled "CY8CKIT-001 PSoC 3 Setup (Kit Design Files.....",
but that does not seem to state it includes PSOC 1 and PSOC 5 install stuff as well.
When I stated "That page does not have anything that shows an ISO disk",
I meant for the entire kit, not the one shown for installing Creator.
|CY8CKIT-001 PSoC 3 Kit Setup (Kit Design Files, Creator, Programmer, Documentation, Examples)||English||576 MB||12/14/2012|
|CY8CKIT-001 PSoC 3 / PSoC 5 ISO (Create CD)||English||1155 MB||12/14/2012|
|CY8CKIT-001 PSoC 3 Kit Only (Kit Design Files, Documentation, Examples)||English||21 MB||12/14/2012|
Based on what I see here 1'st disk is to install Creator, and stuff related to PSOC 3, and Programmer. Nothing
of PSOC 1 or 5.
2'ond disk is an .exe file to install PSOC 3 / 5 stuff, no PSOC 1.
3'rd disk is PSOC 3 stuff only.
So where is the disk that installs all -001 kit capability ?