cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

New Contributor

As you can see, I got the serial out to work, but not the serial in.  I also tried various configs for the uart, but no luck yet. I  don't need to use interrupts yet, so let's leave that out for now.  Pretty simple. . . use crlf to store the string, check the string (future code) for valid stuff, and then do whatever.  More pressing instrumentation problems are awaiting me. Thanks for any help.

   

Never sent a bundled file. Hope it works.

0 Likes
Reply
3 Replies
Esteemed Contributor II

Best is to use

   

Creator->File->Create Workspace Bundle (minimal)
and attach the resulting file.



Bob
 

0 Likes
Reply
Honored Contributor II

Did you look at the UART example projects first? (right-click on the component in the component tree, 'find example projects').

   

How large did you set the TX / RX buffers? If they are larger than 4 bytes you need to enable interrupts (also in the code).

0 Likes
Reply
Honored Contributor II

 Check my UART Rx demo project posted here

   

http://www.cypress.com/?app=forum&id=4749&rID=105248

   

 

   

odissey1

0 Likes
Reply