cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

Anonymous
Not applicable

 I am new to PSOC 5 while i am using FreeSoc2 i am getting this error,Pls help me to sort out of this error

   

An internal error occurred in the fitter: (Error running "C:\Program Files (x86)\Cypress\PSoC Creator\3.2\PSoC Creator\bin/cysjtools.exe": System.ComponentModel.Win32Exception: Access is denied at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo) at System.Diagnostics.Process.Start() at CyDesigner.PSoC.P3Fit.Common.TimingAnalyzer.CyStaSjInterface.Run()).

   

 

   

thanks in advance

0 Likes
Reply
7 Replies
Esteemed Contributor II

Welcome in the forum.

   

Try running with admin rights first.

   

 

   

Did you update recently to Creator version 3.2? This might have gone wrong. I would suggest to de-install and re-install Creator 3.2.

   

Before programming your FreeSoc board I would suggest to ask for an update needed for the board-internal programmer and the new sw-release.

   

 

   

Bob

0 Likes
Reply
Anonymous
Not applicable

 I tried all things still it doesn't work

0 Likes
Reply
Esteemed Contributor II

Can you post your complete project, so that we all can have a look at all of your settings? To do so, use
Creator->File->Create Workspace Bundle (minimal)
and attach the resulting file.



Bob
 

0 Likes
Reply
Anonymous
Not applicable

 Hi 

   

Please Find attachment

0 Likes
Reply
Esteemed Contributor

You had an unterminated for loop, in main.c, should look like

   

this -

   

 

   

int main()
{
    CyGlobalIntEnable; /* Enable global interrupts. */

    /* Place your initialization/startup code here (e.g. MyInst_Start()) */

    for(;;) {
        
    }
       
}

/* [] END OF FILE */

   

Regards, Dana.

0 Likes
Reply
Esteemed Contributor

I noticed on your schematic your LED R is 10K.

   

 

   

To compute Rled

   

 

   

Rled = ( Voh - Vled ) / Iled     Voh is speced for a given current in datasheet

   

                                                   Iled typically 10 - 20 mA for a small low power LED

   

                                                    Vled in its datasheet, usually 1 V - 2.3 V

   

 

   

So it typically winds up as ~ 100 - 200 ohms.

   

 

   

Regards, Dana.

0 Likes
Reply
Anonymous
Not applicable

if u publish any working video(link) using FreeSoc2 also  helpful

0 Likes
Reply