Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

New Contributor
        i read many post and documents about this, but i still have problem to change drive mode in Runtime. i write PRT0DM0 | = 0x01; PRT0DM1 | = 0x01; PRT0DM2 & =~0x01; for pull-Up but it doesn't change. the only way to set pull-up or pull-down is from chip page. pins are not connected to digital block and interrupt are disabled during the operation Any ideas?   
10 Replies