compatible issue

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Hello, 

   

Does psoc designer 5.3 and programmer is compatible to psoc1 evalkit cy8c29466? i am facing prob in downloading the program to the chip.. busy status in the programmer software is flashing in yellow color.

0 Likes
1 Solution
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Yes, Designer and the development kit are working together. Although the latest version is Designer 5.4 and I would suggest you to update to latest.

   

 

   

Bob

View solution in original post

0 Likes
10 Replies
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

Yes, Designer and the development kit are working together. Although the latest version is Designer 5.4 and I would suggest you to update to latest.

   

 

   

Bob

0 Likes
Anonymous
Not applicable

 Thanks for your suggestion..  so there is no problem in using psoc designer 5.4 with psoc1 evalkit? 

0 Likes
Anonymous
Not applicable

 can i use psoc designer 5.4 for cy8c29644.. will it work properly ?

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

We are not always online, so please be a bit patient.

   

 

   

Yes, you can (as I do) use PSoC Designer 5.4 for any PSoC 1 including the kits.

   

 

   

Bob

Anonymous
Not applicable

 Thanks for helping me.

0 Likes
Bob_Marlowe
Level 10
Level 10
First like given 50 questions asked 10 questions asked

You are always welcome.

   

 

   

Bob

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

When you upgrade Designer, sometimes chips that are no longer

   

manufactured may be dropped from parts list, look at release notes

   

regarding this. So sometimes if you are supporting an older chip you

   

may be confined to a certain revision of Designer to work with.

   

 

   

Regards, Dana.

0 Likes
Anonymous
Not applicable

I'm gessing you are using CY3210-PSoCEval1. The CY8C29466 in the kit is still supported in PSOC Designer and will be in the foreseable future. If the miniprog powered and supposedly busy all I could think is maybe the psoc is not ptoperly seated in the socket?

0 Likes
Anonymous
Not applicable

Hello Zeta,

   

yes i am using cy3210 psoceval1 kit and today i have downloaded psoc designer 5.4. i will try with this version and check whether it is working or not.

0 Likes
Anonymous
Not applicable

Hello Dana,

   

well i have not seen the release note yet. i will check it once before proceeding further.

   

thanks for ur reply

0 Likes