PSoC™ 5, 3 & 1 Forum Discussions

Hello everyone!!

I'm working on a project for my 582 class and I'm trying to explore the PLD capabilities on the PSoC. I'm trying to create my own modules described in verilog to implement pieces of hardware in my project just to speed the things up. Anyway, my question is how do I implement more than one verilog file to my module?

So I know that I have to create a new module under Components, and then create the .v file. However, I need to use more modules inside of such .v file, but I haven't find the way to create more .v files and add them to the library.

What I'm trying to say, is that suppose that I create a new module called MyComponent that I will drag and drop eventually to my TopDesign, then I create the .v file for my MyComponent, how do I create new modules inside of that .v file, or how do I add more .v files to the directory in order to use modules that are described in other files.

That's something very common in verilog, right? To create a bunch of modules that will do little things and then create a TopModule, so I suppose that there is a way to do it in PSoC Creator 2.1 but I just haven't find it.

good article 

http://www.cypress.com/?docID=32344

I use LCD from "User Modules" 

It is passible to use LCD module that could work with pin form Port 0 (D3...D0) and Port 2 (RS, R/W, E) withowut writing my own LCD module handler ?

I use PSoC Designer 5.1  and CY8C29466

* sorry for my english.

  Hi all,

   I am a beginner with PSoC 1. Having gone through many app note, i tried my first ever project in PSoC. My aim was to toggle an LED every 1s. Maximum possible configuration ( Vc1 divider= 16, vc2 divider= 16, vc3 (sourced by Vc2) =256 and timer period = 256) gave me 0.6 s . Since it is perceptible i continued as such. In my power Psoc  board an LED is connected to P1_5 . I configured those pins (initial value as 1) . when i programmed the Psoc my led kept on glowing(remaining in its inital value assigned)  no toggling. I have checked for declaration of interrupts and all. I couldnt find more mistakes with my knowledge.

I have attached my project.

Kindly help

Thanks,

Sundar 

 Have you heard of Arduino ? I am sure you would have come across Arduino atleast once. Let me briefly tell you about Arduino. It is a platform which is considered to be the easiest embedded platform to work with. Programming an Arduino is child's play. The Arduino community makes what is called Arduino shield which can sit on top of any Arduino board and provide additional functionality such as XBEE, WIFI, Ethernet and so on.

A team at Michigan State University has now put together a PSoC5 board which will work with Arduino shield. The overall goal of this project is to have PSoC 5 be “Arduino-friendly”. In other words, one of the team at MSU is trying to have Arduino users purchase PSoC products. The overall goal of this project is to have a design that will prevent any technical difficulty when interacting Arduino shields with PSoC 5. 

If you are interested in knowing more, http://www.egr.msu.edu/classes/ece480/capstone/fall11/group01/#about

Is possible to create a can bus communication project to CY8CKIT-003?

is there a sample?

Thank you