baudrate on the kitprog

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
Anonymous
Not applicable

Is a baud rate of 115200 only supported via the kitprog FW ? I am using CY8Ckit-059 and wish to use a higher baud rate for an application . like 460800 baud

I tried by changing the baud rate on the UDB in my application and did not get consistent desired results on PC terminal window

Thanks

Sreedhar

1 Reply
NoriTan
Employee
Employee
25 sign-ins 5 questions asked 10 sign-ins

The specification of the USB-UART bridge is described in the "KitProg User Guide" document as follows.

GS003260.png

The maximum baud rate is 115200

The "KitProg User Guide" can be downloaded from a KIT web page like following.

CY8CKIT-059 PSoC® 5LP Prototyping Kit With Onboard Programmer and Debugger | Cypress Semiconductor

CY8CKIT-046 PSoC® 4 L-Series Pioneer Kit | Cypress Semiconductor

The "KitProg2 User Guide" has same specification.

GS003257.png

The "KitProg2 User Guide" can be downloaded from a KIT web page too.

CY8CKIT-145-40XX PSoC® 4000S CapSense Prototyping Kit | Cypress Semiconductor

There is a dedicated WEB page too.

KitProg2 User Guide | Cypress Semiconductor

Regards,

Noriaki

0 Likes