- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I need to have more information on clock accuracy. In the past I used AN80248 for details but this document is now marked as OBSOLETE.
In my design I have no external clock. What is the best possible accuracy when using :
* USB port
* No USB port
Thanks
Patrick
Solved! Go to Solution.
- Labels:
-
PSoC 5 Architecture
-
PSoC 5LP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Updated information for IMO is available here <https://www.cypress.com/documentation/code-examples/ce219322-psoc-3-and-psoc-5lp-internal-main-osc...
ILO here <https://www.cypress.com/documentation/component-datasheets/ilo-trim >
From the family datasheets ILO accuracy for 24 MHz - non-USB mode is +/- 4%..
Accuracy for 24 MHz USB mode with oscillator locking to USB bus is +/- 0.25%.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Updated information for IMO is available here <https://www.cypress.com/documentation/code-examples/ce219322-psoc-3-and-psoc-5lp-internal-main-osc...
ILO here <https://www.cypress.com/documentation/component-datasheets/ilo-trim >
From the family datasheets ILO accuracy for 24 MHz - non-USB mode is +/- 4%..
Accuracy for 24 MHz USB mode with oscillator locking to USB bus is +/- 0.25%.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I see now AN80248 is indeed replaced by 002-19322 (=CE219322)
Thanks for this answer.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Brock,
Yes, the 24MHz USB mode with the oscillator locking to the USB can achieve +/- 0.25% accuracy. But this assumes the USB is connected to the PC and the PC is providing a 48MHz reference clock from its USB. If the USB is disconnected or the PC is powered down and the power to the PSoC is not via USB, then the external reference clock is missing and the IMO will at best favor a +/- 4% tolerance. Maybe someone from Cypress can weigh in on this.
Len
"Engineering is an Art. The Art of Compromise."