Strictly necessary cookies are on by default and cannot be turned off. Functional, Performance and Tracking/targeting/sharing cookies can be turned on below based on your preferences (this banner will remain available for you to accept cookies). You may change your cookie settings by deleting cookies from your browser. Then this banner will appear again. You can learn more details about cookies HERE.
Strictly necessary (always on)
Functional, Performance and Tracking/targeting/sharing (default off)
I've been working on getting a modified version of the USB MIDI 2x2 example project up and running. My goal as of right now is to simply add an addition port to make it a 3x3 MIDI interface with both an internal and external connection.
So my main issue is the lack of documentation on configuration of the MIDI IN/OUT jacks in the USB macro. The component datasheet gives lots of good info on the descriptors and other USB configuration setting but almost nothing on the MIDI Jack configuration.
Here are the parameters i'm talking about
bJack Type - This is simple, EXTERNAL, EMBEDED, or UNDEFINED
bJackID - Also straight foreword, ID for each jack in the design
bNrInputPins - Have no idea what this parameter is for
baSourceID - No clue on this parameter either
baSourcePin - No idea on this guy either
iJack - The String name for the jack
Can one of you smart folks shed some light on what each of these parameters is for so that I can configure it properly?
Thanks for pointing me in the correct direction. As a note it may be worth while adding a note in the Cypress documentation for each associated interface pointing to it's USB specification/definition. I'm sure others that are not as familiar with the entirety of the USB specification would find it usefully knowing where to look.