- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
to connect embedded design with PC using a USB CDC profile is common, This approach suffer from the ned of installing a windows driver. Using HID profile this drawback is removed, for HID do not need a driver to install. I am a cypress newbe and I would be very pleased if there is an example for USB HID generic avaliable. (other than mouse or keyboard) Could anybody help with suchan example project
Solved! Go to Solution.
- Labels:
-
PSoC 5 Device Programming
-
PSoC 5LP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi rugl_1600761,
You can go through the application note here, which explains the USB HID basics with PSoC 3 and PSoC 5LP : https://www.cypress.com/documentation/application-notes/an57473-usb-hid-basics-psoc-3-and-psoc-5lp
You can go through the code example which demonstrates the use of USB block in PSoC 5LP to implement a HID mouse- https://www.cypress.com/documentation/code-examples/ce95394-usb-hid-mouse-psoc-35lp
Also, You can go through the code example which demonstrates to configure USB block in PSoC 6 as a human interface device (HID). The device enumerates as a 3 button mouse. I have provided the link here: https://www.cypress.com/documentation/code-examples/ce226423-psoc-6-mcu-usb-hid-mouse-application
PSoC 6 is our latest high performance dual-core microcontroller. It incorporates a full-speed USB device interface up to eight endpoints. A 512-byte SRAM buffer is provided and also, DMA is supported.
Please go though the above and let us know in case you need further clarifications.
Best Regards,
Aashita