cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

Anonymous
Not applicable

 I have encounterd problem in SD card interfacing with SPI. Initialisation can not be done. EVen SCLK is not generating. Plz giv me some sugetns about what would be the problem.

0 Likes
Reply
9 Replies
Esteemed Contributor
0 Likes
Reply
Esteemed Contributor

Also consider posting your project,

   

 

   

"Project"

   

"Archive Workspace/Project"

   

 

   

Regards, Dana.

0 Likes
Reply
Esteemed Contributor

And there is the emFile component in Creator -

   

 

   

Features
  Up to four Secure Digital (SD) cards in SPI mode
  FAT12/16 or FAT32 format
  Optional integration with an Operating System (OS)
  Optional Long File Name (LFN) handling

   

 

   

Regards, Dana.

0 Likes
Reply
Anonymous
Not applicable

File -> Open -> Find Example Project -> Search for emFile -> emFile_Example.

   

Use this example project.

0 Likes
Reply
Anonymous
Not applicable

My controller is ES2 type.So the new Emfile is not compactiple for that. Iam using micro SDHC card. For it any difference in initialisation by SPI??

0 Likes
Reply
Anonymous
Not applicable

 Why don't u get a new Production release sample and do it?

0 Likes
Reply
Esteemed Contributor II

When you bought a development kit with an ES2 silicon on it you may change your product to an actual one. There is an exchange program by Cypress handeling that, have a look here http://www.cypress.com/?app=kitupgrade 

   

 

   

Bob

0 Likes
Reply
Anonymous
Not applicable

Please post SPI And Uart code for RTC.

0 Likes
Reply
Esteemed Contributor

If you do this from Creator menu -

   

 

   

File -> Open -> Find Example Project -> Search for "emFile" -> emFile_Example

   

 

   

OR you start an empty project, then place a UART and a RTC module, right click the

   

modules one at a time (after de-selecting/un-hightlighting them), from that menu pick

   

"Find Example Project", and you have a choice to add them to the existing project or

   

open them in a new project.

   

 

   

Regards, Dana.

0 Likes
Reply