cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

Anonymous
Not applicable

I have an option to run the code from SRAM in PSoC 5. Is there a similar option in PSoC 3 to run the code from SRAM. How do I do it?

0 Likes
Reply
11 Replies
Anonymous
Not applicable

To my understand. PSoC3 cannot excute code in RAM.

0 Likes
Reply
Anonymous
Not applicable

 Just wondering if PSoC4 can have code excute in RAM?

0 Likes
Reply
Esteemed Contributor

Answer is yes, PSOC 4 and 5 address space is linear, modified von neumann, as opposed to

   

PSOC 3, Harvard.

   

 

   

Regards, Dana.

0 Likes
Reply
Esteemed Contributor II

Did John von Neumann study at Harvard? (smiley)

   

 

   

Bob

0 Likes
Reply
Anonymous
Not applicable

 In ARM Cortex-M3 architecture, lower 0.5GB (0x00000000 – 0x1FFFFFFF) represents code memory.

   

In PSoC 5LP, lower 32KB SRAM is present in 0x1FFF8000 – 0x1FFFFFFF memory location which is in code memory space of CM3. That is why it is possible to execute the code from SRAM provided that code is stored in this lower 32KB of SRAM space.

0 Likes
Reply
Anonymous
Not applicable

In PSoC 4, 4KB of SRAM starts from 0x20000000 location only which is not in Code space region. So, it is not possible to execute code from SRAM of PSoC 4 which is possible in PSoC 5LP.

0 Likes
Reply
Esteemed Contributor

In the TRM it shows that code can be executed out of SRAM, see attached

   

 

   

Regards, Dana.

0 Likes
Reply
Esteemed Contributor

This seems to support it as well -

   

 

   

http://www.google.com/url?sa=t&rct=j&q=cortex%2BM0%2Bcode%2Bexecution%2Bsram&source=web&cd=3&ved=0CD...

   

 

   

 

   

Regards, Dana.

0 Likes
Reply
Anonymous
Not applicable

 I think we should move this thread to PSoC4 sub forum.

0 Likes
Reply
Esteemed Contributor
        The thread is essentially complete, no need to move it. Regards, Dana.   
0 Likes
Reply
Anonymous
Not applicable

Hi,

   

 

   

In PSoC 5LP, it is possible to place a code in the upper SRAM region (i.e) above the address 0x2000000. Similarly in PSoC 4, it is possible to possible to place a code in the upper SRAM region. There is no limitation that the code in the upper SRAM region cannot be exectued.

   

 

   

Regards,

   

Asha

0 Likes
Reply