cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

Anonymous
Not applicable

 Hi to all,

   

               Can anybody tell me what are the necessary modifications to implement pulse oximeter on psoc 3

   

CY8C3866XAI-040ES2. Here i am attaching the minimal of the oximeter which was done on psoc 1 an example project i got .

0 Likes
Reply
1 Solution
Esteemed Contributor

What is the problem you are having ? Also you would need a schematic for someone

   

to examine. ZIP all this into one file then do add file to post at bottom of screen using

   

Browse button.

   

 

   

Regards, Dana.

View solution in original post

0 Likes
Reply
12 Replies
Esteemed Contributor

What is the problem you are having ? Also you would need a schematic for someone

   

to examine. ZIP all this into one file then do add file to post at bottom of screen using

   

Browse button.

   

 

   

Regards, Dana.

View solution in original post

0 Likes
Reply
Anonymous
Not applicable

 here i am uploading the minimal

0 Likes
Reply
Anonymous
Not applicable

 screenshot of schematic

0 Likes
Reply
Anonymous
Not applicable
0 Likes
Reply
Esteemed Contributor

The question of what is the problem/issue you are having is unanswered.

   

 

   

I opened the project, the top schematic is empty ? And you are using an older

   

version of Creator, which is ill advised for a new project, as the latest release

   

generally soves bugs and other issues found.

   

 

   

Regards, Dana.

Esteemed Contributor

Also the schematic you posted is a PSOC 1 route schematic, not the overall schematic of all sensors,

   

devices, chips..... We can then only guess what you are trying to do.

   

 

   

Do you want the forum to port the PSOC 1 design to a 3 design for you ? If so you might

   

solicit to that effect, so there is no confusion.

   

 

   

Regards, Dana.

Anonymous
Not applicable

 Yes, Pulse oximeter using  Nelcor DS100A  adult finger sensor to be ported to PSoC 3

0 Likes
Reply
Anonymous
Not applicable

 can we port pulse oximeter to PSoC 3

0 Likes
Reply
Anonymous
Not applicable

you can port your code on to PSoC3 easily

Anonymous
Not applicable

Sir,

   

   i am trying to develop aa pulse oximeter in psoc 3 but i am not being able to do the transimpedance amplifier properly. i am not getting the wave.i am using nellcor ds 100a SpO2 sensor. i have connected pin 2 and 3 to two timing signals and got the led working. i connected the photodiode cathode to transimpedance amplifier -ve terminal and anode to positive terminal but i was not able get any signal out.i have made the fcorner as 35khz, i should be getting some noise signal but i can't see that.can anybody suggest me a way out. thanks in advance.

Esteemed Contributor

Recommend you post your project for forum to look at.

   

 

   

Regards, Dana.

Anonymous
Not applicable

 hi Sanjoo,

   

Can u post your work here

   

Regards'

   

PRP

0 Likes
Reply