cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

Anonymous
Not applicable

Hello All, 

   

     I am very new to programming and expecially the PSoC. I am an Engineering Student and must learn the M3 Cortex, I chose PSoC as my solution.

   

I am having a few problems which I can not resove from any web work through. I am recieving the error message:

   

"this device was recognized but PSoC Creator does not support using it at this time" 

   

I followed the work around from here: www.cypress.com/ and here: www.cypress.com/

   

I reset the device (unplugged it from the USB cable, no external power is connected, just from the USB cable) and also reset the computer. Dispite these attempts I am still getting the same error messege. 

   

 

   

Any recomendatons?

0 Likes
Reply
6 Replies
Esteemed Contributor II

You are here in PSoC3 forum which does not have an ARM processor, Instead you should use a PSoC5 LP which has got an ARM M3 CPU.

   

You need Creator 3. and a development kit for PSoC 5 LP (the "LP" is essential!)

   

Please check your version and resources.

   

 

   

Bob

0 Likes
Reply
Esteemed Contributor

If what you have is an older PSOC 5 board, not PSOC 5 LP, then last

   

version of Creator to support that was 2.2. So either you learn with

   

the older tool or upgrade the board.

   

 

   

If you have an older board it might be possible to get it upgraded to

   

the 5LP board -

   

 

   

    

   

          http://www.cypress.com/?rID=51577

   

 

   

Regards, Dana.

0 Likes
Reply
Anonymous
Not applicable

Thank you for all your help, I will look into the purchase of a new board. I do not believe I qualify for the free upgrade since I have the PSoC 3 and not and older 5.

   

 

   

Thank you all for your help

0 Likes
Reply
New Contributor

 CYPRESS said it is a bug in new version(PSoC Creator 3.0),and will be solved in 3.1.

0 Likes
Reply
Honored Contributor II

Do you mean that Creator 3.1 will bring support for PSoC5 (not 5LP) devices back?

0 Likes
Reply
Esteemed Contributor II

@nolaziness

   

Where did you get that information from, because it sounds a bit unlikely.

   

 

   

Bob

0 Likes
Reply