I want to interface a bluetooth transceiver module(third party) to PSOC 5 LP development board. I wanted to know if I will be able to use AT commands for the same. If yes how?
Welcome in the fascinating world of PSoCs!
The connection depends on the interface your BT-transmitter allows. When A TTL-level UART can be used it is quite probable that is understands AT-commands. If in question, post a link to your BT transmitter datasheet.
Thanks for the reply. I understand, if my bluetooth module provides me TTL signal levels, I can use AT commands for interfacing it with PSOC. I am looking forward to use HC 05 Bluetooth transceiver module as it supports TTL signal Levels. Thanks for the answer !!
With the three top contributors to this forum posting about 500 (!!!) answers within one month you really are not allone in the dark. Yes, I admit that sometimes a PSoC may behave a bit (or byte) complex and sometimes the translation of the datasheet does not reveil the answer to your question but here are many developers and Cypress engineers willing to help you.
So you can "start thinking PSoC"
BTW: Did you hear / read already about the new BLE chips? A combination of PSoC and Bluetooth transmitter
Thanks Bob !!
I did see BLE recently. But I have already purchased PSOC 5 LP kit few months back. So thought of interfacing bluetooth module.
Hi Dude, I have been using PSOC-4 CY8CKIT-043 M series.I need to interface the HC-05 Bluetooth tx and rx for my applications.
I able to Receive the data through Bluetooth, but the thing is that i cant transmit the data through Bluetooth.
I use pin 7.0 & 7.1 for this purpose.Please help me to get the result for transmit and receive the data through Bluetooth.