MiniPog3 Status LED is blinkin

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
xy_283156
Level 2
Level 2

Hi,

   

I have a problem to program a CY8C3866 with a MiniProg3 Rev B. After disconnecting and some minutes the LED is on constantly. The MiniProg3 is recognized by the PSoC reator 3.0, the µC not. My board is selfpowered, all VDDs are at the same level. If I connect the programmer to my board the Status-LED of the programer is blinkin (switchs on/off @ ~3Hz).What does that means? 

   

thanks

0 Likes
4 Replies
xy_283156
Level 2
Level 2

I have to say that I programmed another, similar board succesfully. So I think its not the boardlayout or so..

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

From the Miniprog3 user manual -

   

 

   

   

 

   

Regards, Dana.

0 Likes
xy_283156
Level 2
Level 2

okay, thanks Dana. I think I found something. On my board I've connected Pin1[2] for XRES, that dosent work (even I've checked the option in the system window). After soldering a wire to XRES it worked...

0 Likes
ETRO_SSN583
Level 9
Level 9
250 likes received 100 sign-ins 5 likes given

You are always welcome!

   

 

   

Dana.

0 Likes