Strictly necessary cookies are on by default and cannot be turned off. Functional, Performance and Tracking/targeting/sharing cookies can be turned on below based on your preferences (this banner will remain available for you to accept cookies). You may change your cookie settings by deleting cookies from your browser. Then this banner will appear again. You can learn more details about cookies HERE.
Strictly necessary (always on)
Functional, Performance and Tracking/targeting/sharing (default off)
In the PSoC Family dasheet (Doc number 001-44094 Rev. *F), the layout guidelines are given on page 9. In the accompanying figure (Fig. 2-5) it is not clear what is the electrical connection of C13 and C14. Moreover, pin 46 (which is a GPIO pin - P3) seems to have a via on it which connects it to ground. Can someone please clarify what needs to be done?
Figure 2-4 shows the schematic for the PCB layout shown in figure 2-5.
According to the schematic, C13 and C14 are connected to P3 (pin 46) which is used as a bypass capacitor for the Delta Sigma ADC. There is an option in the ADC configuration Reference Section and "Internal Bypassed on P3.2".
The PCB layout snap is obscure in that portion. Thank you for bringing this to our notice.