cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

Anonymous
Not applicable

 Hello,

   

I have 2 cards with PSOC 5LP, one is the freeSOC another is PSOC 4 Pioneer kit (programmer part)

   

I tried to connect both psoc chips with my J-Link v8 ( Vtarget RST SWO SWCLK SWV are connected),

   

but none of them are identified.(In Jlink Commander and IAR)

   

When I connect it to freeSOC, I cutted the wires from the on board programmer.

   

however, when I connect the psoc 4 device it can be recongnized as ARM Cortex-M0 correctly.

   

My Jlink works fine with the chips from other manufacturers and updated to the lastest firmware.

   

Any other persons have this problem?

   

Any solutions?

   

Thanks

0 Likes
Reply
1 Reply
Esteemed Contributor

Not sure if this is still relevant -

   

 

   

    

   

          http://www.segger.com/jlink-software.html

   

    

   

          http://www.segger.com/jlink-ide-integration.html

   

    

   

          http://www.cypress.com/?app=forum&id=2492&rID=89011

   

 

   

Regards, Dana.

0 Likes
Reply