cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

joli_601446
Contributor

Hello, I'm a newbie learning I2C with the PSoC5 Dev Kit. I found some example code and have tried to implement an I2C Master. The Master sends out 3 bytes. I have tried to use the BridgeControl Panel to read the data but am have some troubles. Here is a screen shot of the BridgeControl:

BridgeControl_Error.jpg

I should be seeing +'s in the response window which means that the Master didn't send the data. I will upload my project for anyone to look over and see what I may be doing wrong.

Thank you,

Joe

0 Likes
Reply
1 Solution
RyanZhao
Moderator
Moderator

Hi Joe,

Bridge Control Panel can not be used as I2C Slave.

Recommend to use some logic analysis tool or a PSoC I2C Slave to verify the master code.

Thanks,

Ryan

View solution in original post

0 Likes
Reply
2 Replies
RyanZhao
Moderator
Moderator

Hi Joe,

Bridge Control Panel can not be used as I2C Slave.

Recommend to use some logic analysis tool or a PSoC I2C Slave to verify the master code.

Thanks,

Ryan

View solution in original post

0 Likes
Reply
joli_601446
Contributor

Ryan,

HI, thank you for responding to my post. I was watching the Youtube video PSoC 101 I2C Transmit example. In that example is the PSoc the slave? I guess the comment on the video there is saying the BridgeControl is the Master, is that correct?

What about using 2 PSoC kits connected together two laptop computers to run the PSoc code, is that do-able? I just want learn how to implement an I2C Master.

Thank,

Joe

0 Likes
Reply