cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

Skdk_4669631
New Contributor II

Hello everyone !

I’m new with PSoC and I would like to generate a sin wave from the VDAC.

To do so I need a ( high ) number of values for the argument of the sine function.

I tried to create a list like in python : theta = [0:(2*pi//100:2*pi] for example, but every time I try something it is invalid.

I also tried to mane a for loop outside the main function like this :

unsigned int step:

for ( step=0; step<100; step++)
{

}
it didn’t work as well. I had expectation of ‘(‘

Also, let’s imagine I have a set of values for the angle of my sine function, let us call it x.

Can I do sin(x) to have another set of value of the sin of each value for the angle ?

thank you for your help

0 Likes
1 Solution
odissey1
Honored Contributor II

Skdk,

You can use a portion of this project, which includes sine wave generator for testing:

DelSig_ADC - Filter - VDAC8 streaming demo using DMA

Re: Wave dac maximum samples

ADC-Filter-VDAC_01b_C.png

It uses several custom components which encapsulate tunable clock (DDS32) and RAM-DMA-VDAC transfer (WaveGen). Simple rotary encoder is used for adjusting sine frequency (or amplitude).

/odissey1

View solution in original post

7 Replies
odissey1
Honored Contributor II

Skdk,

You can use a portion of this project, which includes sine wave generator for testing:

DelSig_ADC - Filter - VDAC8 streaming demo using DMA

Re: Wave dac maximum samples

ADC-Filter-VDAC_01b_C.png

It uses several custom components which encapsulate tunable clock (DDS32) and RAM-DMA-VDAC transfer (WaveGen). Simple rotary encoder is used for adjusting sine frequency (or amplitude).

/odissey1

View solution in original post

Skdk_4669631
New Contributor II

Thank you for the quick answer Bota,

It really helps me.

Good afternoon,

Steph

0 Likes
Skdk_4669631
New Contributor II

Hello again.

I was writing a code to do the task I wanted. To do so I need an array to initialize before the main function.

I wrote :

float array[100];

int i =0;

for ( i=0; i < 100; i++)

{

    array = i+1;

}

I get "expected identifier or '(' " error next to the for line. I don't know why since the for loop works fine in the main function.

May I have some help ?

Thank you,

Steph

0 Likes
odissey1
Honored Contributor II

Steph,

This compiles ok. Post your project here if problem persist.

/odissey1

int main(void)

{

    CyGlobalIntEnable; /* Enable global interrupts. */

   

    float array[100];

    int i =0;

    for (i=0; i < 100; i++)

    {

        array = i+1;

    }

    for(;;)

    {

        /* Place your application code here. */

    }

}

0 Likes
Skdk_4669631
New Contributor II

Thank you for your answer Bota !

Does it make a difference if I write this code outside the main function ? I wanted my array to be a global variable. Can I define the array outside the main function and the for sequence inside the main function ?

Thank you very much

0 Likes
odissey1
Honored Contributor II

Steph,

Now it is global

/odissey1

float array[100]; // global aray

int main(void)

{

    CyGlobalIntEnable; /* Enable global interrupts. */

    int i =0;

    for (i=0; i < 100; i++)

    {

        array = i+1;

    }

    for(;;)

    {

        /* Place your application code here. */

    }

}

0 Likes
Skdk_4669631
New Contributor II

Bota,

Thank you very much for your help

0 Likes