cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

New Contributor II

Was working up to the point where I used the PSoC Programmer. The green LED was steady green. When I programmed, the programming failed and the device did not show up anymore in Device Manager. Now the green LED is steady for a second or so when I unplug and replug, then starts blinking rapidly. Have been using proper ESD procedures.

   

Does anybody have any suggestions?

0 Likes
Reply
1 Solution
Esteemed Contributor II

Press the switch on the Kitprog for more than 5s. Green LED will light up steadily again.

   

 

   

Bob

View solution in original post

0 Likes
Reply
1 Reply
Esteemed Contributor II

Press the switch on the Kitprog for more than 5s. Green LED will light up steadily again.

   

 

   

Bob

View solution in original post

0 Likes
Reply