cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

ShSe_1328206
New Contributor

Regarding CY8C5287AXI-LP095 and CY8C5288LTI-LP090,

Please let us know foot print.

0 Likes
1 Solution
MaMi_1205306
Honored Contributor

Hi,

If it's a footprint, I recommend looking at the Gerber data in the demo kit.

CY8CKIT-050 for AX package

https://www.cypress.com/documentation/development-kitsboards/cy8ckit-050-psoc-5lp-development-kit

pastedImage_3.png

CY8CKIT-059 for LT package

https://www.cypress.com/documentation/development-kitsboards/cy8ckit-059-psoc-5lp-prototyping-kit-on...

pastedImage_2.png

NOTE : The guidelines may differ depending on the manufacturer of each company. Especially the processing of the exposed pad.

Regards,

View solution in original post

0 Likes
6 Replies
MotooTanaka
Esteemed Contributor
0 Likes
MaMi_1205306
Honored Contributor

Hi,

If it's a footprint, I recommend looking at the Gerber data in the demo kit.

CY8CKIT-050 for AX package

https://www.cypress.com/documentation/development-kitsboards/cy8ckit-050-psoc-5lp-development-kit

pastedImage_3.png

CY8CKIT-059 for LT package

https://www.cypress.com/documentation/development-kitsboards/cy8ckit-059-psoc-5lp-prototyping-kit-on...

pastedImage_2.png

NOTE : The guidelines may differ depending on the manufacturer of each company. Especially the processing of the exposed pad.

Regards,

View solution in original post

0 Likes
ShSe_1328206
New Contributor

Thank you for reply.

I'll confirm it.

Regards,

0 Likes
ShSe_1328206
New Contributor

Our customer cannot review the Gerber data.

Do you have any idea?

Best regards,

0 Likes
MaMi_1205306
Honored Contributor

You can see it by using the software described in the README.txt in the Gerber data folder.

/*

GraphiCode, Inc. provides a freeware gerber viewer, GC-Prevue, available for download at te following URL:

http://www.graphicode.com/pages/products.cfm#_Toc5

Once this application is installed you can view the *.art files by using the "File | Import" function.

Cypress uses a .art extension for gerber files. Gerber files are ASCII text and are easily identified to someone "learned in the art."

*/

There has been described as "Cypress uses a .art extension for gerber files".

.art file can be opened with the above freeware.

Please confirm for the above.

Regards,

0 Likes
MaMi_1205306
Honored Contributor

Hi,

Apparently there are CAD Libraries.

I didn't know either.

https://www.cypress.com/cad-resources/psoc-5lp-cad-libraries?source=search&cat=technical_documents

Regards,

0 Likes