PSoC 5, 3 & 1 MCU

[Anonymous]

Hello everyone,

   

I recently downloaded the Bootloader Host application from the below link:

   

http://www.cypress.com/documentation/application-notes/an68272-psoc-3-psoc-4-and-psoc-5lp-uart-bootl...

   

The application uses a DVK(PSoC 5LP) as a bootloading device to connect to and bootload other PSoC devices. I was wondering if this operation is possible to implement on a single board by modifying the application.

   

For example can I download an arbitrary bootloadable.cyacdn file, parse it to a string image and bootload the same device from this string image? Basically can the device bootload itself with this Bootloader Host application?

   

Thank you in advance,
Kaan

[himam_31]

Hello,

   

So in this case you boot loader will have the string parser application and the .cyacd file. Also you need to modify the bootloader component such a way that it does not use any communication component.Also you will have to make sure that tha PSoC5LP flash must have enough memory to store th .cyacd and have a bootlodable project.

   

Thanks,

   

Hima