cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

Contributor II

Has anyone here implemented a Bootloader using Bluetooth SPP ok?

   

I want to add remote firmware update function to my product. It has a Bluetooth module with SPP set up at 230 kB.

   

I am wanting to update the firmware from either an Android phone (using BT SPP) or by Computer using BT/USB dongle set up as virtual com port. This option would enable me to use the PC bootloader manager and not need to also develop the Android app I hope.

   

There may be some gotchas, so I would appreciate any constructive suggestions or your shared experience.

   

My assumptions is that the Bootlader feature is set up exactly the same the a standard UART implemented bootloader.

   

Thanks

0 Likes
Reply
2 Replies
Employee

Hello

   

Please have a look at the document http://electronicdesign.com/communications/bootload-wirelessly-using-bluetooth-serial-port-profile

   

Thanks,

   

Hima

0 Likes
Reply
Contributor II

Thanks Hima. That was just what I was looking for.

0 Likes
Reply