PSoC 5, 3 & 1 MCU

[Anonymous]

        Is there a way to find out what audio ADC is used on the CY8CKIT-003A development kit (see at the center top of the block diagram--attached) ? I expect that one needs to be a member of Apple's MFi program for detail information--like a schematic. Perhaps someone can share the ADC device P/N. Thanks !   

[JoMe_264151]

I cannot find a CY8CKit-033.

   

If you are referring to the Kit-003 you can get all the schematics from this stie www.cypress.com/ although I suspect that the block-diagram is just an example what you may perform with the kit and not the real application.

       

Bob

[ETRO_SSN583]

The 003A kit is obsolete, and did not have a I2S Audio ADC on it.

       

The block diagram you show is PSOC abilty to interface to an I2S device, in your case

   

an ADC. The block diagram is just a capability diagram of what PSOC can do and interface

   

to.

       

Regards, Dana.

[Anonymous]

        This is the kit: http://www.cypress.com/?rid=67222 Thanks for quick responses.   

[ETRO_SSN583]

Looks like they offer no BOM, kit schematics, etc.., unless they are on

   

install disk.

       

However maybe contact MFi@cypress.com for help.

       

Regards, Dana.

[Anonymous]

        Cirrus Logic CS42L51 for the win