cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 5, 3 & 1 MCU

New Contributor

My ADC is in ASC10 block and my RefMux is ACB00. i set RefMux to the AGND.

   

now i want to connect and discount AGND to the ADC input with API.

   

how can i do it??

0 Likes
Reply
1 Solution
Moderator
Moderator

Assuming you are using the incremental ADC, you can connect the ADC input to RefMux at ACB00 by means of the following register write:

   

ASC10CR1 &= 0b00011111;

   

You can refer to this register on page 194 in the PSoC1 Technical Reference manual or do a search for ASCxxCR1.

View solution in original post

0 Likes
Reply
1 Reply
Moderator
Moderator

Assuming you are using the incremental ADC, you can connect the ADC input to RefMux at ACB00 by means of the following register write:

   

ASC10CR1 &= 0b00011111;

   

You can refer to this register on page 194 in the PSoC1 Technical Reference manual or do a search for ASCxxCR1.

View solution in original post

0 Likes
Reply