- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have multiple projects using the -059 board and the usb/uart on it.
During normal operation I am powering the main board but not the programmer. When I want
to talk to it I connect the usb cable and while the driver appears active (comm port is there) I am unable to
communicate until I press the reset button on the programmer portion. I do not want to do this because
it resets all the stored data. Creator 4.1 has no problem communicating with it but it somehow resets it.
I have tried using the push button thru a control port to toggle the reset pin on the uart with no success.
The other question I have is how to keep Creator from 'generating' certain source programs and reloading the
original source over my modified source programs. I enhanced the I2C lcd display programs to allow for turning
the panel lighting off as well as setting other I2C address but every time I have to rebuild the project the files get
overwritten and I have to play games to get them back.
Any help would be appreciated,
Ed
Solved! Go to Solution.
- Labels:
-
PSoC 5 Device Programming
-
PSoC 5LP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ed,
Re you second question: best way would be to make a copy of the Cypress stock component (I2C LCD), rename it, and modify it to your needs. Once renamed a component, find and replace all instances of the old name, particularly in Verilog file and customizer files.
/odissey1