工程我可以编译过。你要么卸掉到PD重新安装一下试试,最好装到默认路径
idata dump at output/PDProject2.idata
ROM 26% full. 2117 out of 8192 bytes used (does not include absolute areas).
RAM 9% full. 69 bytes used (does not include stack usage).
Built with ICCM8C STD V7.05.00
PDProject2 - 0 error(s) 0 warning(s) 12:02:35
CY8C20236A属于PSoC1 系列。
Cypress的烧录器可以CY3217-MiniProg1 (cypress.com)(已停产)或CY8CKIT-002 PSoC® MiniProg3 Program and Debug Kit (cypress.com)
通用烧录器可以参照 Device Programmer System Partners (cypress.com)适用PSoC1的那些。
开发板是https://www.cypress.com/documentation/development-kitsboards/cy3280-20x66-universal-capsense-control... 貌似也停产了。
所以推荐看看PSoC比较新的系列,例如PSoC4 32-bit Arm® Cortex®-M0 PSoC® 4 (cypress.com) 性价比挺好的。
好的谢谢,已购买CY8CKIT-002 PSoC® MiniProg3
另外请问在PSoC Designer 5.4新建一个CY8C20236A工程并编译时,产生以下错误,是什么原因呢?请帮忙解答一下,谢谢!
附件是工程文件
Starting MAKE...
creating project.mk
name translation failed on d:/Program\ Files\ (x86)/Cypress/PSoC\ Designer/5.4/Common/CypressSemiBuildMgr - 3
name translation failed on d:\Program - 2
name translation failed on Files - 2
name translation failed on (x86)\Cypress\PSoC - 3
name translation failed on Designer\5.4\Common\CypressSemiBuildMgr\tools\include\CY8C20066 - 3
make: *** No rule to make target `D:\Documents\documents\documents\PSoC', needed by `lib/obj/csa_emc_1.o'. Stop.
PDProject2 - 1 error(s) 0 warning(s) 22:10:39
CSA_bIsSensorActive(0) --> CSA_EMC_1_bIsSensorActive(0)
你好,把main函数中的所有代码删除,直接编译也会产生该错误
工程我可以编译过。你要么卸掉到PD重新安装一下试试,最好装到默认路径
idata dump at output/PDProject2.idata
ROM 26% full. 2117 out of 8192 bytes used (does not include absolute areas).
RAM 9% full. 69 bytes used (does not include stack usage).
Built with ICCM8C STD V7.05.00
PDProject2 - 0 error(s) 0 warning(s) 12:02:35