cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

user_3568726
New Contributor II

I created a new project, when I compiled, there is some errors, shows that unble to pack the design into 2 UDBs,but My schmetic is very simple. resource meter shows that UDB  still has free space, just like picture below, how to solve this problem? thanks very much.PSCO.jpg

0 Likes
1 Solution
Bob_Marlowe
Expert II

An UDB consists of several different parts, LUTs registers, datapath, macrocells, ALU etc. Some of the resources seem to have been spent while others are still avail. >Click on the "+" sign in front of the UDB in the resource list to get more information.

A brief estimation: I agree with the fitter, tihis design might need more than 2 UDBs. Try a larger chip as the CY8C4245.

Bob

View solution in original post

0 Likes
4 Replies
Bob_Marlowe
Expert II

An UDB consists of several different parts, LUTs registers, datapath, macrocells, ALU etc. Some of the resources seem to have been spent while others are still avail. >Click on the "+" sign in front of the UDB in the resource list to get more information.

A brief estimation: I agree with the fitter, tihis design might need more than 2 UDBs. Try a larger chip as the CY8C4245.

Bob

View solution in original post

0 Likes
user_3568726
New Contributor II

hi Bob,

     thanks for your answer, but i still do not understant, there are four UDBs in the chip, if it can not pack the design into 2UDBs, why do not use more UDBs? for example. if it uses 4 UDBs, there may be no problem.

0 Likes
Bob_Marlowe
Expert II

The CY8C4244-AXI-443 has got two UDBs only. Check in Creator device selector.

Bob

user_3568726
New Contributor II

thanks Bob, I selected wrong device.... 

0 Likes