Announcements
Community Announcement : Welcome to the NEW Cypress Developer Community.
cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

saurabh
New Contributor II
 
0 Likes
2 Replies
Hari
Moderator
Moderator

Hi @saurabh 

 

An I2C or UART interface is required for CapSense Tuner to communicate with PSoC device. Please let me know if you are using a custom board or a Cypress development kit. 

In case you are using a custom board, please make sure that an I2C or UART interface exist and an I2C-USB bridge for connecting it to the PC. 

 

You can also take a look at the code examples (CapSense P4 One Button) for the firmware required to enable CapSense Tuner communication. 

 

Best regards, 
Hari

0 Likes
saurabh
New Contributor II

Hello @Hari,

I tried to implement the same ezi2c interface few months ago using the sample code. For the first time the firmware gets successfully updated into the microcontroller but after this procedure the mcu doesn't accept any program (It seems as if the uC programming pins gets locked). Carried out this on 2-3 mcu's but resulted into the same. Can u suggest any alternative?

0 Likes