PSoC™ 4 Forum Discussions
Anyone know when these will be available? I cant seem to find any information about it.
Hi,
Are there any plans to offer the cypress PSoC BLE chips as surface mount modules like the well known "BR-LE4.0-D2A" with antenna onboard? Alternatively, does anyone know of a vendor that sells such a device?
Thanks!
Show LessCan someone tell what is the different between PSoC4xx7-BLE and CYBL10x6x?
How frequency need to call CyBle_ProcessEvents?
I use RTOS and BLE connection interval 100ms.
Calling CyBle_ProcessEvents evry 10ms, is enough? Or need less?
Or need, like in your example, all time call CyBle_ProcessEvents in loop?
Show LessHello all,
Is there a way to store and load different profiles? For example if I had two HID over GATT profiles (one for mouse, another for gamepad) is there a way to store both in flash and select them on boot?
Thanks,
Rendman
Show LessPSoC Creator 3.1 is the new version of the IDE that includes support for the new Bluetooth Low Energy devices from Cypress - PSoC 4 BLE and PRoC BLE.
Also included with this release is the new BLE Component, which abstracts the entire Bluetooth Low Energy v4.1 Core Specification into a simple, easy-to-use Component that can easily be dragged and dropped onto your design. The new BLE Component allows easily and quick configuration of the entire Bluetooth Low Energy Protocol Stack using the GUI-based configuration tool. Also included with the BLE Component are a set of new BLE-specific APIs that enable easy communication over the BLE wireless link.
Grab an Early Acess (Beta) version of PSoC Creator 3.1, here: www.cypress.com/CreatorEA
(this will not overwrite you current installation of PSoC Creator 3.0)
Show LessPSoC 4 BLE = ARM Cortex-M0 + Programmable Analog Front Ends + Programmable Digital + CapSense + Bluetooth LE Radio with integrated Balun --> all in a one-chip solution!
Learn all about our latest PSoC device for the IoT, PSoC 4 BLE at www.cypress.com/PSoC4BLE
Implement your own Bluetooth LE (Smart) design using the brand new BLE Pioneer Kit at www.cypress.com/cy8ckit-042-ble
Get early access to PSoC Creator 3.1 (Beta) with a new Bluetooth LE (Smart) Component at www.cypress.com/CreatorEA
PSoC 4 BLE is your one-chip solution for low power wireless, sensor-based systems for the IoT
Show LessPSoC 4 BLE is a single-chip SoC that integrates the following:
- ARM Cortex-M0 CPU up to 48 MHz
- 256/32Kb, 128/16Kb Flash/SRAM (128Kb sampling now, 256Kb coming soon)
- 2.4 GHz Bluetooth Low Energy Radio with Integrated Balun
- 4 x Opamps (operational in Deep-Sleep Mode)
- 2 x Comparators (operational in Deep-Sleep Mode)
- 1 x SAR ADC 12bit, 1-Msps with 8-ch Sequencer
- 1 x CapSense CSD block for touch-sensing
- 4 x TCPWM (Timer/Counter/PWM) blocks
- 2 x SCB (Serial Communication UART/SPI/I2C) block
- 4 x UDB (Universal Digital Blocks, PLD-based programmable logic) blocks
- 1 x Segment LCD block
- 36 GPIO
- Five low-power modes (Active, Sleep, Deep-Sleep, Hibernate, Stop Modes)
A block diagram of the device can be see here: PSoC 4 BLE Block Diagram
The device datasheet (prelim) is available here: PSoC 4 BLE Datasheet
Show Less