PSoC™ 4 Forum Discussions
Hi,
This is a followup question to our previous question that was answered here: Solved: What version of SDK are we using? - Infineon Developer Community.
We have submitted our medical device to the FDA with all necessary documentation. Our device includes Cypress MCU PSOC4 with BLE (CYBLE-224110). The FDA sent us a request for information (RFI) .
We submitted that information to the FDA, and we got these questions back from the FDA regarding your PSOC4 SDK (which is considered here the OTS):
So this brings me to ask:
1. Could you share any information on the development methodologies of your PSOC4 SDK?
2. What are/were the V&V activities performed for your PSOC4 SDK?
3. If you were to terminate your support for the PSOC4 SDK, how could we assure continued maintenance and support for the PSOC4 SDK?
4. Do you have any ISO certificate, and could you share it with us?
Thanks.
Show LessHi infineon.
Is there a newer version of PSoC4 power estimator tool than v09?
Attached file does not include new products in PSoC4 listed below.
======================
PSoC 4000T
PSoC 4100S Max
PSoC 4100S Plus
PSoC 4100S Plus 256KB
PSoC 4200DS
PSoC 4100/4200 BLE
PSoC 4700
======================
Best Regards.
YuMa
Show LessCan you tell me if the psoc specs can drive RGB/RGB666 screens when driving lcd screens again, and if so, what is the maximum resolution supported? If yes, what is the maximum resolution supported? What is the conversion relationship between segment in the specification and this one?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/PSoC-4/psoc-%E5%AF%B9LCD%E5%B1%8F%E7%9A%84%E6%94%AF%E6%8C%81/td-p/703260
Show LessHi Community, I'm currently working on Cypress MCU for my bootloader implementation since I'm having a touch switch and using an ESP32 for Wi-Fi connectivity and accessibility. I've created a project in my PSOC Creator for my application and tested it with Bootloader Host which seems perfectly.
Right after this process I tried putting in some conditional statements where I'll be receiving some hex data for ex, 0xB4 etc. and whenever I receive this, ill be calling Bootloadable_Load(); and start flashing it via Bootloader Host.
Now I want to send the .cyacd file via UART to my CYP MCU and I'm trying hard to understand "Do I need to send acknowledgement for every packet received and or it will be sent by my API for Bootloader? Additionally I've heard that .cyacd is non standard form of HEX Binary, so what steps should I take to implement it properly.
Show Less
Hi,
I am using the CY8CKIT-045S from the PSoC 4500s Pioneer Kit. To program the microcontroller, I am using PSoC Creator 4.4. I often need to modify the code created in the Creator and then reprogram the microcontroller. Therefore, I am looking for a way to automate the programming process. Currently, I manually do this using CTRL + F5. Is there a way, for example, through the command line, to initiate the programming process? Additionally, I am exploring options to automatically modify the code before programming. Since I could easily do this in another IDE, a command line tool or another method to open the modified C file would also be very helpful.
Cheers!
Show LessHI Infineon:
As we know, PSOC 4000T can support gesture with slider, but when we enable the slider gesture, no gestrue event can show in modustoolbox V3.1, So how can we use the Gesture Event with API? Were can we find the API, TKS;
Show LessUnable to program PSoC4 CY8C4014LQI-421 with miniprog4
1, miniprog4's GND, VTAGE, SWCLK, SWDIO are connected to the board.
2, run the Psoc creator, select the program appears the following error
3, run Psoc programmer also can not burn, the following error appears
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/PSoC-4/%E7%94%A8miniprog4%E6%97%A0%E6%B3%95%E5%AF%B9PSoC4-CY8C4014LQI-421%E8%BF%9B%E8%A1%8C%E7%BC%96%E7%A8%8B/td-p/701510
Show LessI am using CY8C4025AXI-S412, under what circumstances will the external crystal automatically jump to the internal crystal? Can I jump back to the external crystal again?
smartconx_target@Q!w2e3r4t5y6u7i8o9p0||/t5/PSoC-4/%E5%A4%96%E9%83%A8%E6%99%B6%E6%8C%AF%E8%87%AA%E5%8A%A8%E8%B7%B3%E5%88%B0%E5%86%85%E9%83%A8%E6%99%B6%E6%8C%AF/td-p/700738
Show Less