cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Contributor

When using CapSense Tuner with UART, we need to send "header" and "tail" packets.

What is the reason?

pastedImage_0.png

0 Likes
Reply
1 Solution
Esteemed Contributor

Hi,

Very good question!

At first I thought it must be in the manual of CapSense Tuner,

but I could not find any from PSoC 4 related CapSense Tuner Documents,

there may be some which  I have not found though.

Then finally I find it in the "PSoC 1 and Capsense Controller - CapSense Data Monitoring Tools" document.

https://www.cypress.com/file/37331/download

In the page 11, there is a table

CapSense_UART_Packet.JPG

So it was defined then and there.

moto

View solution in original post

1 Reply
Esteemed Contributor

Hi,

Very good question!

At first I thought it must be in the manual of CapSense Tuner,

but I could not find any from PSoC 4 related CapSense Tuner Documents,

there may be some which  I have not found though.

Then finally I find it in the "PSoC 1 and Capsense Controller - CapSense Data Monitoring Tools" document.

https://www.cypress.com/file/37331/download

In the page 11, there is a table

CapSense_UART_Packet.JPG

So it was defined then and there.

moto

View solution in original post