- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear All,
- The time multiplexed central example code is not working on CYBLE-222014 module as described in pdf document. It compiles and code runs on modules but has following issues. I have attached the project in zip file. Could any buddy have a look and tell me what is wrong with the example code?
- The peripheral does not reconnect itself on hardware reset.
- Central application keeps looking for peripheral even though it is powered on.
Device missing: 00 A0 50 00 00 01
Device missing: 00 A0 50 00 00 02
Device missing: 00 A0 50 00 00 01
Device missing: 00 A0 50 00 00 02
Device missing: 00 A0 50 00 00 01
Device missing: 00 A0 50 00 00 02
Device missing: 00 A0 50 00 00 01
2. Is there any other such working example where central connects to multiple peripheral in time multiplexed manner.
In attached project, I have already selected device type CYBLE-222014 for both peripheral and Central. Also updated components from project menu.
Regards,
Mayank
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Mayank,
Please add cyBle_discoveryInfo.discProcedure=CYBLE_GAPC_OBSER_PROCEDURE; in the CYBLE_EVT_STACK_ON event of Central project before start discovery.
Can you test the project with the above mentioned modification and let me know if still the problem exists.
Thanks & Regards,
Anjana
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Some questions what does the Uart terminal screen show. Are you doing a C and the device number to reconnect? Also are you using the Dongle or just Ble modules CYBLE-222014?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks guys.
cyBle_discoveryInfo.discProcedure=CYBLE_GAPC_OBSER_PROCEDURE;
Solved the problem.
I have another question,
Why CYBLE-222014 disconnects current slave when I connects to new slave in given example.?
Is CYBLE-222014 not supporting 8 slave connections as other BLE devices?
Would you suggest any alternate series of Cypress BLE module that supports 8 slave connection as mentioned above?