cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Anonymous
Not applicable

Dear  Cypress,

   

Good Evening,

   

we would like to work with PSoC 4XX8_BLE product family for our project.but in our project we must need 2xUARTs, 1x I2C and 1xSPI.

   

for external modules interface.

   

I have gone through the data sheet of PSoC 4XX8_BLE product family in this it has 2xSCBs with the combination of UART, I2C and SPI.

   

my query:

   

1) How many combinations of serial communication I can achive with the PSoC 4XX8 BLE ?

   

eg: like 2xUARTs, 1x I2C and 1xSPI all i want use at a time for control the individual modules.

   

2) what are possibilities of serial communications i can achive with the  PSoC 4XX8 BLE?

   

I would like to evaluate the above combinations then only i can finalize the chip for our project.

   

please help for the above queries.

   

waiting for valuable information.

   

Best Regards,

   

Ravinder Reddy 

0 Likes
Reply
1 Solution
Esteemed Contributor

This built. Attached.

   

 

   

Regards, Dana.

View solution in original post

0 Likes
Reply
3 Replies
Esteemed Contributor

Do both UARTS need to be full duplex ? Rx & Tx ? Speed ?

   

 

   

Regards, Dana.

0 Likes
Reply
Anonymous
Not applicable

need only half duplex for transmission only.

   

regards,ravinder

0 Likes
Reply
Esteemed Contributor

This built. Attached.

   

 

   

Regards, Dana.

View solution in original post

0 Likes
Reply