cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Anonymous
Not applicable

Hello,

   

I am pretty new to bluetooth and I have gone through some of the SDK on how to create custom GATT profiles 

   

and how to use certain modules. I just am not sure how to choose which modules I need for my application.

   

 

   

I am trying to send Serial Data (from a MCU using UART and sending the data over the air using RF antenna) over the

   

air to a bluetooth chip so that I can print it out to a terminal or even read using a bluetooth phone app.

   

 

   

To read in the serial data, which module should I use? And which module to send it to the bluetooth (USB dongle preferred)

   

to be able to print the data to a terminal using the bluetooth (possibly with UART).

0 Likes
Reply
1 Solution
Honored Contributor II

Its not as simple as with normal Bluetooth, where you would use the SPP profile. But have a look at the example project #20, which implements a UART bridge over BLE. Its using the BLE dongle at the other end, but you can use another Cypress BLE module too.

View solution in original post

0 Likes
Reply
1 Reply
Honored Contributor II

Its not as simple as with normal Bluetooth, where you would use the SPP profile. But have a look at the example project #20, which implements a UART bridge over BLE. Its using the BLE dongle at the other end, but you can use another Cypress BLE module too.

View solution in original post

0 Likes
Reply