cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Anonymous
Not applicable

Is it possible to push software changes from one CYBLE-02001-00 module to the other via RF interface?

0 Likes
1 Solution
rola_264706
Honored Contributor II

William Welcome to the forum.  Here is a ble program that does just that I am also sending you a PDF that explains it. I didn't up date the Ble to the latest one as it is a Pro-type at this time.

View solution in original post

0 Likes
2 Replies
rola_264706
Honored Contributor II

William Welcome to the forum.  Here is a ble program that does just that I am also sending you a PDF that explains it. I didn't up date the Ble to the latest one as it is a Pro-type at this time.

View solution in original post

0 Likes
Anonymous
Not applicable

Thanks for the info. I will need to dig deeper into this material. First blush it does appear this would work for external memory. In our application we intend to communicate between two CYBLE-02001-00 modules. On one end it will be tied to an M8 ARM processor. On the other end we will be using the embedded M0 in the module itself to address another device via I2c and toggle a few GPIO pins.

   

Would this update methode still be valid?

0 Likes