- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello, I'm not sure which programmer can be used to program CYBLE-224116-01, can you advise one?
Solved! Go to Solution.
- Tags:
- cyble
- programmer
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
CYBLE-224116-01 device can be programmed using MiniProg3, http://www.cypress.com/documentation/development-kitsboards/cy8ckit-002-psoc-miniprog3-program-and-d...
If you plan to design your own board, you can place the 10 pin JTAG connector there.
The CYBLE-224110-EVAL EZ-BLE PSoC Evaluation Board enables you to evaluate and develop applications with the CYBLE-224116-01 EZ-BLE PSoC XT/XR BT 4.2 Module whose detail is available at this link:
Thanks,
Ankita
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
CYBLE-224116-01 device can be programmed using MiniProg3, http://www.cypress.com/documentation/development-kitsboards/cy8ckit-002-psoc-miniprog3-program-and-d...
If you plan to design your own board, you can place the 10 pin JTAG connector there.
The CYBLE-224110-EVAL EZ-BLE PSoC Evaluation Board enables you to evaluate and develop applications with the CYBLE-224116-01 EZ-BLE PSoC XT/XR BT 4.2 Module whose detail is available at this link:
Thanks,
Ankita
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ankita,
Thanks for your help!
I had installed the programming software "PSoCProgrammerSetup_3.28.4_b4307.exe" but can't find CYBLE-224116-01 in the device family pull-down menu. Should I need to use another software "CyProgrammer_2.0.0.355.exe"?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
You will find it here as shown in image below in PSoC Programmer 3.28.4
Thanks,
Ankita
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I found it, thanks Ankita!