cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

chmoc_1567941
New Contributor

i attached my project.

   

i cant got current output on my decided pin.

   

can you tell me where i did mistake???

   

i got only 0.1uA current for any value of idac.

0 Likes
3 Replies
JoMe_264151
Expert II

Check in your underlying hardware schematic file to see whether the chosen pin is in use for something as I2C.

   

I strongly recommend to update Creator to latest version and to update the components of your project to latest.

   

 

   

Bob

0 Likes
rola_264706
Honored Contributor II

Your clock for the PWM is too slow should be 12  Mhz.  The Led pin doesn't need the external terminal  checked  in config. file for the pin. Here is your program with changes.  I am running PSoC Creator  3.3 CP3 (3.3.0.9604) As Bob suggested please upgrade to the latest software.

0 Likes
rola_264706
Honored Contributor II

Here is another program with high resolution.

0 Likes