- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please answer below.
The same question is written in English and Japanese.
・English
When "Chip Protection" is set to "Protected",
running "Read" on "PSoC Programmer" failed to read Flash.
What is the reason for this?
When "Chip Protection" is set to "Protected",
I think as follows.
・Can't debug
・Can read Flash
・Japanese
"Chip Protection"を"Protected"にし、
"PSoC Programmer"で"Read"実行したところ、Flashが読めませんでした。
この理由はなんでしょうか?
デバッグはできなくても、Flashは"Read"はできるという認識です。
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
以下の文書を参照してください。
"PSoC 4100S and PSoC 4100S Plus: PSoC 4 Architecture TRM, Document No. 002-10621"
"14. Device Security" 章に以下の記述があります。
PROTECTED モードでは、ユーザのコード及びメモリへの debug access がすべて禁止されます。デバッグに使用したいのであれば、 Flash Protection を使ってください。
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I think that chip protection prevents the read out from the chip
according to 14.2.1 Device Security of PSoC 4100S and PSoC 4100S Plus PSoC 4 Architecture TRM
But at least, it seems that we can return the mode to OPEN.
チッププロテクションは第三者にチップ内部の知財を盗まれることを防ぐモードではないかと思います。
デバッグ及び、一部のレジスタを除く読み出しが出来なくなっているようです。
幸い、このモードはオープンモードへの復帰が可能なようです。
moto
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
以下の文書を参照してください。
"PSoC 4100S and PSoC 4100S Plus: PSoC 4 Architecture TRM, Document No. 002-10621"
"14. Device Security" 章に以下の記述があります。
PROTECTED モードでは、ユーザのコード及びメモリへの debug access がすべて禁止されます。デバッグに使用したいのであれば、 Flash Protection を使ってください。