PSoC 4 MCU

[YSJE_3566666]

I want to connect 3 LEDs(each 20mA) to 3 GPIOs directly for low cost (not use external transistors).

Datasheet says 200mA of maximum total chip current but I can't find specification of each gpio.

Is there any specification of current on each gpio or any solution?

[MotooTanaka · Accepted solution]

Hi,

I also could not find operation rating for GPIO current,

but in Table.2 Absolute Maximum Ratings,

it says +/- 25mA, so probably 20mA for each would be acceptable.

moto