cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

Anonymous
Not applicable

Can we update PSoC 4200M firmware over the air?

Can we use Emulated EEPROM in PSoC 4200M?

Please someone help me out on the above

0 Likes
1 Solution
GeonaP_26
Moderator
Moderator

Placing Em_EEPROM at fixed location or checksum exclude region is application dependent. It is not necessary for all projects. Please refer to Em_EEPROM code example: http://www.cypress.com/documentation/code-examples/ce195313-psoc-emulated-eeprom

View solution in original post

0 Likes
3 Replies
JoMe_264151
Expert II

PSoC4200M hasn't got a BLE, so over the air upgrade is a bit difficult.

emEEProm is supported.

Bob

0 Likes
Anonymous
Not applicable

Hi Bob,

Thanks for the help.

I have questions about EEPROM implementation. Please help me on that

Do we neet to do the steps as mentioned in datasheet for using EEPROM in PSoC 4200M?

Steps mentioned:

1. Placing the EEPROM in fixed location

2. Adding EEPROM to checksum exclude section.

I have tried the steps but I couldn't make it.

I have created custom link file and also pasted the code given in datasheet about mentioning the EEPROM address. After that I got stuck.

I got the error also.

Error is : The command 'arm-none-eabi-gcc.exe' failed with exit code '1'.

0 Likes
GeonaP_26
Moderator
Moderator

Placing Em_EEPROM at fixed location or checksum exclude region is application dependent. It is not necessary for all projects. Please refer to Em_EEPROM code example: http://www.cypress.com/documentation/code-examples/ce195313-psoc-emulated-eeprom

View solution in original post

0 Likes