PSoC 4 BLE Max Device Current

[RoRo_3281831]

Where can I find the specification for the total allowable device current for the PSoc 4 BLE  (CY8C4248LQI-BL583)?

I looked in the datasheet, expecting to find it under "Device Level specifications".

There is a 25 mA spec for max GPIO current per pin, but nothing specifies how much total current the device can source or sink from all GPIO pins simultaneously.

I also looked in the TRM, but couldn't find it there either.

[BiBi_1928986 · Accepted solution]

Hello.

You were close to finding it, just needed to look at little further down the datasheet.
It's listed at bottom of GPIO DC Specifications.
200mA.

Regards.

[RoRo_3281831]

Thank you.  Guess I went datasheet-blind for a bit. I knew it had to be in there.