cancel
Showing results for 
Search instead for 
Did you mean: 

PSoC 4 MCU

New Contributor II

Hello All,

I'm working with capsense buttons example code provided with CY8CKIT - 046 KIT.

I'm trying to integrate UART in interrupt mode, and it's not working. It seems system goes in sleep mode and hence it's not working. 

Can someone please shed some light, what's going on?

0 Likes
Reply
1 Solution
Employee

Hi Ashish,

You seem to not have not checked "Rx FIFO not empty" in UART SCB component configurator window. (UART Advanced tab)

Pls enable the "Rx FIFO not empty" interrupt source and check if ISR is triggered.

Thanks,
Shanmathi

View solution in original post

0 Likes
Reply
3 Replies
Employee

Pls let us know which code example you are using or you could also attach your project.

Also, elaborate on your issue so that we can reproduce it at our end.

Thanks,
Shanmathi

0 Likes
Reply
New Contributor II

Hi,

Please find the project in the attachment for your reference.

Capsense buttons are working fine while UART interrupt is never triggered when I send some data over UART (using Putty).

Regards,

Ashish

0 Likes
Reply
Employee

Hi Ashish,

You seem to not have not checked "Rx FIFO not empty" in UART SCB component configurator window. (UART Advanced tab)

Pls enable the "Rx FIFO not empty" interrupt source and check if ISR is triggered.

Thanks,
Shanmathi

View solution in original post

0 Likes
Reply