Not able to program CY8C4724LQI-S401

[viku_1389326]

Hi Team,

Am getting below error, please let me know how to resolve.

Error: "This device was recognized, but PSOC creator does not support using it at this time"

Tools used for programming: PSoC Creator

Target IC: CY8C4724LQI-S401

Programmer: CY8CKIT-148 PSOC 4700S inductive sensing evaluation kit

Thanks,

Vinod

[JobinT_31]

Hi Vinod,

Can you please confirm the target IC is correct, you are mentioning the target IC as CY8C4724LQI-S401.
By default 148 kit have CY8C4745AZI-S413.

Have you changed the IC in the kit, in that case you need to change the device in PSoC Creator project.

# Right click on project -> Device Selector.

Thanks

Jobin GT

[viku_1389326]

1. Programming to  custom board via swio,sck,vcc,gnd,reset pins. And Not able to acquire port from cy8ckit-148.

2. I Changed IC target, Getting below error

--------------- Build Succeeded: 08/27/2019 12:10:22 ---------------

Warning: Port KitProg3 (CMSIS-DAP/BULK/1118115401137400) in use

Error: dbg.M0033: The selected debug target 'CY8C4745AZI-S413' is not compatible with the project's selected device 'CY8C4724LQI-S401'.

Warning: dbg.M0039: There was an error running port acquire: PSoC device is not acquired! Check connection of the chip to the programmer